XCAP Control Panel for the Mikrotron MC1311 with the PIXCI® miniH2F

XCAP software software provides easy to use controls for the Mikrotron MC1311 camera as supported by the PIXCI® miniH2F frame grabber using the PCI Express Mini x1 Gen 2 / M.2 bus/interface. After following the camera manufacturer's directions to configure the camera, these controls allow easy configuration of the frame grabber to match!

(XCAP Control Panel for the Mikrotron MC1311)

Try these controls: Download, install, and run XCAP. Click PIXCI®, PIXCI® Camera Info. Click under 'Adjust Dialog' to launch interactive controls for this or any other supported camera.

Back to the PIXCI Selection Guide