XCAP Control Panel for the LORD Imaging DVL5000T with the PIXCI® miniH2x4F
XCAP software software provides easy to use controls for the LORD Imaging DVL5000T camera as supported by the PIXCI® miniH2x4F frame grabber using the M.2 x4 Gen 2 bus/interface. After following the camera manufacturer's directions to configure the camera, these controls allow easy configuration of the frame grabber to match!
Try these controls: Download,
install, and run XCAP.
Click PIXCI®, PIXCI® Camera Info.
Click under 'Adjust Dialog' to launch interactive controls for this or any other