XCAP Custom Control Panel for DAGE-MTI CCD100E with the PIXCI® SV5B

XCAP software software provides custom, camera specific, controls for the DAGE-MTI CCD100E camera as supported by the PIXCI® SV5B frame grabber using the PCI 32 Bit bus/interface. These integrated controls make the camera and frame grabber exceptionally easy to use!

(XCAP Control Panel for the DAGE-MTI CCD100E)

Try these controls: Download, install, and run XCAP. Click PIXCI®, PIXCI® Camera Info. Click under 'Adjust Dialog' to launch interactive controls for this or any other supported camera.

Back to the PIXCI Selection Guide