XCAP Control Panel for the IDT M-3 Color with the PIXCI® CL2

XCAP software software provides easy to use controls for the IDT M-3 Color camera as supported by the PIXCI® CL2 frame grabber using the PCI 64 Bit bus. After following the camera manufacturer's directions to configure the camera, these controls allow easy configuration of the frame grabber to match!

(XCAP Control Panel for the IDT M-3 Color)

Try these controls: Download, install, and run XCAP. Click PIXCI®, PIXCI® Camera Info. Click under 'Adjust Dialog' to launch interactive controls for this or any other supported camera.

Back to the PIXCI Selection Guide