EPIX, Inc. Home Page
   

XCAP Custom Control Panel for a DAGE-MTI CCD100E with the PIXCIŽ SV5



GUIDE XCAP DOWNLOAD

XCAP software provides custom, camera specific, controls for the DAGE-MTI CCD100E camera as supported by the PIXCIŽ SV5 on the PCI 32 Bit bus. These integrated controls, below, simplify the use of the camera and PIXCIŽ SV5!

(XCAP Control Panel for the DAGE-MTI CCD100E)

Try these controls: Download, install, and run XCAP. Click PIXCI®, PIXCI® Camera Info. Click under 'Adjust Dialog' to launch interactive controls for this or any other supported camera.

Back to the PIXCI Selection Guide

Back to the EPIX Home Page
 
Image Processing Products For Research and Industry
Modified:
12-Feb-2008

Specifications and prices subject to change without notice.

EPIX® imaging products are made in the USA.

EPIX, SILICON VIDEO, and PIXCI are registered trademarks of EPIX, Inc. 4MIP, SVIP, XCIP, XCAP, 4MEG VIDEO, 1MEG VIDEO, SILICON VIDEO MUX, QUICK SET VIDEO, 12-7 MUX, IMAGE MEMORY EXPANSION, COC40, COC402, CL3SD, 4MOBJ, SVOBJ, XCOBJ, XCLIB, PXIPL, and XCLIBIPL are trademarks of EPIX, Inc. Other brand, product, and company names are trademarks or registered trademarks of their respective owners.

Copyright © 2008 EPIX, Inc. All rights reserved.